Paving Estimating Software
Paving estimating software that turns a set of plans into a priced paving estimate in about 30 minutes — AI measures asphalt tonnage and square yards off the plan, no manual takeoff.
Free to try · no login · ~30 minutes to a priced paving estimate.
Watch P2P estimate paving from a real blueprint
Upload a plan set and our AI returns a priced, bid-ready paving estimate with color-coded markups in about 30 minutes.
Your trade has its own units. So does the AI.
Paving estimating comes down to area, depth, and tonnage. You're measuring every drive, lot, and lane in square yards off the site plan, applying lift thickness, and converting area and depth into tons of asphalt at your mix density before you can even price the mat. Get the square yards or the depth wrong and your tonnage is off, and asphalt mistakes show up by the truckload. Then you take off aggregate base by the ton, count striping in linear feet and stalls, price tack, milling, and curb, and split mobilization across the job. P2P reads the site and paving plans, measures paved area in square yards, applies your lift depths and mix density, converts it to asphalt and base tonnage, and prices the mat, base, and striping against your own material and crew rates — so you quote in minutes instead of an afternoon with a planimeter and a density chart.
From paving plans to a bid-ready number.
Square yard & tonnage takeoff
Upload the site plan and the AI measures paved area in square yards, applies your lift depths and mix density, and converts it straight into tons of asphalt and base.
Base, striping and curb, counted
The takeoff tallies aggregate base by the ton, striping in linear feet and stalls, and curb and milling, so the full scope is priced from the plan, not bolted on after.
Bid more paving jobs
Turn a site plan into a priced paving estimate in about 30 minutes, so you can bid every lot and roadway job instead of skipping the ones that need a careful area takeoff.
How a paving estimate gets built.
Upload your blueprint
Drop a PDF, image, or CAD file — even a messy, multi-sheet set. No login required to start.
AI builds the takeoff
The AI reads the sheets, finds your trade's scope, and measures it — counts, lengths, areas — in minutes, not hours.
Get a priced estimate
It prices the takeoff against your labor and material rates, so you get a bid-ready estimate you just review and send.
Paving estimating, three ways.
| P2P Estimating | Manual takeoff | Legacy software | |
|---|---|---|---|
| Time per estimate | ~30 minutes | 4–8 hours | 1–3 hours + setup |
| Does the takeoff | AI, automatic | You, by hand | You, point-and-click |
| Priced to your rates | Automatic | Manual spreadsheet | Manual setup |
| Cost | $25–$75 / estimate | Your billable time | $100s/mo + seats |
| No-login trial | Yes | — | Rarely |
Start free. Pay only for estimates you run.
Try your first paving takeoff free with no login. Paid plans start at $99/mo, and every estimate runs about $25–$75 of credit — far less than the day it replaces.
Other trades P2P estimates
Paving estimating — FAQ
How does AI measure square yards and tonnage?
Does it handle base, striping, and curb?
Can I set my own mix density and crew rates?
How much does a paving estimate cost?
Do I need an account to try it?
How accurate is the paving takeoff?
Bid your next paving job in minutes.
Upload a blueprint and watch the AI build your priced estimate. Free to try, no login.