Fencing Estimating Software
Fencing estimating software that turns a set of plans into a priced fence estimate in about 30 minutes — AI measures fence linear feet and counts posts, gates, and corners, no manual takeoff.
Free to try · no login · ~30 minutes to a priced fencing estimate.
Watch P2P estimate fencing from a real blueprint
Upload a plan set and our AI returns a priced, bid-ready fencing estimate with color-coded markups in about 30 minutes.
Your trade has its own units. So does the AI.
Fence estimating is a perimeter you have to walk on paper before you ever set a post. You're tracing the fence line off the site plan to total linear feet, dividing by your panel or post spacing to count line posts, then adding corner posts, end posts, and gate posts, and locating every gate and its swing before you can price material and labor. Get the run length or the post spacing wrong and the count is off down the whole line — short a few posts and the crew stops mid-install, long and you've quoted concrete and pickets you'll never use. P2P reads the site plan, traces the fence line to measure linear feet, counts line, corner, and gate posts at your spacing, locates the gates, and prices it against your own per-foot and per-gate rates, so you can quote a fencing job in minutes instead of stepping off the plan with a scale and a calculator.
From fencing plans to a bid-ready number.
Automatic linear-foot takeoff
Upload the site plan and the AI traces the fence line to total linear feet by run and fence type, so your material footage matches the property, not a rough step-off.
Posts and gates counted
The takeoff divides each run by your post spacing to count line posts, adds corner and end posts, and locates every gate with its post set, so the hardware list is built before you bid.
Bid more fencing jobs
Turn a site plan into a priced fence estimate in about 30 minutes, so you can quote every property that comes in instead of skipping the ones that aren't worth the takeoff.
How a fencing estimate gets built.
Upload your blueprint
Drop a PDF, image, or CAD file — even a messy, multi-sheet set. No login required to start.
AI builds the takeoff
The AI reads the sheets, finds your trade's scope, and measures it — counts, lengths, areas — in minutes, not hours.
Get a priced estimate
It prices the takeoff against your labor and material rates, so you get a bid-ready estimate you just review and send.
Fencing estimating, three ways.
| P2P Estimating | Manual takeoff | Legacy software | |
|---|---|---|---|
| Time per estimate | ~30 minutes | 4–8 hours | 1–3 hours + setup |
| Does the takeoff | AI, automatic | You, by hand | You, point-and-click |
| Priced to your rates | Automatic | Manual spreadsheet | Manual setup |
| Cost | $25–$75 / estimate | Your billable time | $100s/mo + seats |
| No-login trial | Yes | — | Rarely |
Start free. Pay only for estimates you run.
Try your first fencing takeoff free with no login. Paid plans start at $99/mo, and every estimate runs about $25–$75 of credit — far less than the day it replaces.
Other trades P2P estimates
Fencing estimating — FAQ
How does AI measure fence linear feet?
Does it count posts and gates?
Can I set my own per-foot and per-gate rates?
How much does a fencing estimate cost?
Do I need an account to try it?
How accurate is the fencing takeoff?
Bid your next fencing job in minutes.
Upload a blueprint and watch the AI build your priced estimate. Free to try, no login.