Drywall Estimating Software
Drywall estimating software that turns a set of plans into a priced drywall estimate in about 30 minutes — AI counts board square footage and finish levels off the plans, no manual takeoff.
Free to try · no login · ~30 minutes to a priced drywall estimate.
Watch P2P estimate drywall from a real blueprint
Upload a plan set and our AI returns a priced, bid-ready drywall estimate with color-coded markups in about 30 minutes.
Your trade has its own units. So does the AI.
Drywall estimating comes down to board square footage and finish levels, and there's a lot of it. You're scaling every wall and ceiling off the plans, measuring both faces, breaking out 1/2-inch from 5/8-inch and Type X, then figuring how many 4x8 or 4x12 sheets that actually buys after waste. On top of the board you're counting mud, tape, corner bead, and screws, and deciding whether each room is a Level 3, 4, or 5 finish — because the hang is the easy part and the finish is where the labor hours hide. Miss the ceiling height on a stairwell or forget the demising walls and your sheet count is short before you start. P2P reads the floor plans and reflected ceiling plans, measures board area surface by surface, applies your sheet size, finish level, and waste factor, and prices the hang and finish against your own labor and material rates — so you bid a drywall job in minutes instead of an evening counting sheets.
From drywall plans to a bid-ready number.
Automatic board takeoff
Upload the plans and the AI measures wall and ceiling board square footage room by room, separates 1/2-inch, 5/8-inch, and Type X, and converts area into sheet counts with your waste factor.
Finish levels and accessories
Set the finish level per room and your rates for mud, tape, corner bead, and screws, so the estimate reflects the real labor difference between a Level 4 and a Level 5.
Bid more drywall jobs
Turn a plan set into a priced drywall estimate in about 30 minutes, so you can bid every job that comes in instead of skipping the ones that aren't worth a night of counting sheets.
How a drywall estimate gets built.
Upload your blueprint
Drop a PDF, image, or CAD file — even a messy, multi-sheet set. No login required to start.
AI builds the takeoff
The AI reads the sheets, finds your trade's scope, and measures it — counts, lengths, areas — in minutes, not hours.
Get a priced estimate
It prices the takeoff against your labor and material rates, so you get a bid-ready estimate you just review and send.
Drywall estimating, three ways.
| P2P Estimating | Manual takeoff | Legacy software | |
|---|---|---|---|
| Time per estimate | ~30 minutes | 4–8 hours | 1–3 hours + setup |
| Does the takeoff | AI, automatic | You, by hand | You, point-and-click |
| Priced to your rates | Automatic | Manual spreadsheet | Manual setup |
| Cost | $25–$75 / estimate | Your billable time | $100s/mo + seats |
| No-login trial | Yes | — | Rarely |
Start free. Pay only for estimates you run.
Try your first drywall takeoff free with no login. Paid plans start at $99/mo, and every estimate runs about $25–$75 of credit — far less than the day it replaces.
Other trades P2P estimates
Drywall estimating — FAQ
How does AI count drywall board square footage?
Can it tell the difference between finish levels?
Does it handle 5/8-inch and Type X board?
How much does a drywall estimate cost?
Do I need an account to try it?
How accurate is the drywall takeoff?
Bid your next drywall job in minutes.
Upload a blueprint and watch the AI build your priced estimate. Free to try, no login.